Clipper

Description5 meter long extension cable for wind masthead unit.This product may not be returned to the original point of purchase. Please contact ...

Description7m Depth Transducer Extension CableSpare 150kHz depth transducer with 7 meter cable.This product may not be returned to the original poi...

DescriptionThe AIS Engine 3 is supplied with a free copy of `SeaClear' and a trial version of Software on Board. A data cable to connect to the 9 p...

DescriptionAIS Plotter/Radar - Requires GPS Input & VHF AntennaThe Nasa Marine AIS SART Plotter is the first stand alone AIS receiver / plotter...

DescriptionThe BM-1 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 600 Amp hours. It is supplied ...

DescriptionBluetooth Battery MonitorWhen you need a battery monitor but don't have space for the display or routing thecables would be a nightmare,...

DescriptionBM-1 LI Battery Monitor for 12V LithiumThe BM-1 battery monitor is designed to monitor performance of 12 volt lead acid battery systems,...

DescriptionCompact battery monitor, just 124 x 62mm x 23mm! Based on the highly successful BM-1 marine battery monitor, the BM-1 Compact is especia...

DescriptionCompact battery monitor, just 124 x 62mm x 23mm! Based on the highly successful BM-1 marine battery monitor, the BM-1 Compact is especia...

DescriptionClipper BM-2 Battery MonitorThe BM-2 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 60...

DescriptionThis connects directly to the master wind unit. As well as repeating the wind speed it shows wind direction in high resolution when sail...

DescriptionThe Clipper Compass Repeater has all the features of the master unit and an independent off course alarm.Steer to course functionWhen th...

DescriptionThe Clipper Compass is a fully electronic compass with remote fluxgate sensor. The large clear display has 7 levels of illumination and ...

DescriptionCradle Mount BracketOptional cradle mount bracket for Clipper MOBi, Navtex, MeteoMan and AIS Radar display units.This product may not be...

DescriptionIf you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. ...

DescriptionIf you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. ...

DescriptionSpare 150kHz depth transducer with 7 meter cable.This product may not be returned to the original point of purchase. Please contact the...

DescriptionBest selling combined Speed/Distance Log and Echo Sounder in standard 110mm square size. Suitable for open cockpit mounting. Technical S...

DescriptionNEW - The Log without a paddlewheel and no moving partsThe Clipper EASYLOG shows speed, trip and total distance on a high visibility liq...

DescriptionEasy NavtexEasy to read. This new navtex receiver features big, bold characters and intuitive message formatting.Easy to program. Simple...

DescriptionEX-1 Exhaust Temperature Monitor/AlarmThe EX-1 continually displays the exhaust gas temperature in wet exhaust systems giving advanced w...

DescriptionThe Clipper GPS repeater has quickly established itself as the market leader in cockpit GPS repeaters. Typical of the Clipper range it b...

DescriptionComplete kit for mounting depth transducer inside GRP hull.This product may not be returned to the original point of purchase. Please c...

DescriptionInstrument Pod for 2 Clipper InstrumentsCLZ-PODRobust POD moulding to suit 2 x Clipper Cockpit display units. Suitable for open cockpit...

DescriptionProtect your Clipper instrument from the elements with this spare weather cover.This product may not be returned to the original point o...

DescriptionMeteoMan BarometerThe rate of change of barometric pressure and history of wind speed can be an invaluable indicator of imminent conditi...

DescriptionMOBi Fob Waterproof fob uses standard AAA type batteries Compact display size: 150 x 112 x 42mm Fob weight:100 grams Fob dimen...

DescriptionMOBi Man Overboard IndicatorThe MOBi is a state of the art, fail-safe transponder man overboard system. It consists of a base unit and u...

DescriptionClipper NMEA 2000 Compliant Wind SystemThe Wind System consists of the version 2 mast head sensor and a small translator box, the box is...

DescriptionNMEA Compass Sensor Compact and waterproof NMEA compass sensor transmits NMEA 0183 sentence HDG to Clipper, Target and Cruiser or other ...

DescriptionSpare paddlewheel and spindle, simple fit for all Clipper Logs.This product may not be returned to the original point of purchase. Plea...

DescriptionIf you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. ...

DescriptionComplete Paddle Wheel Unit Spare complete log impellor unit with skin fitting and 7 meter cable.This product may not be returned to the ...

DescriptionThe Clipper Log Repeater has its own independent alarm function as well as repeating all data from the master unit. Technical Specificat...

DescriptionImpellor unit without skin fitting Spare log impellor unit with 7 meter cable.This product may not be returned to the original point of ...

DescriptionSupernova Combi Tri and Anchor L.E.D MastlightSupernova lights use high efficiency LEDs ensuring long life and low power consumption. A ...

DescriptionSupernova Tricolor Navigation LightSupernova lights use high efficiency LEDs ensuring long life and low power consumption. A tough polyc...

DescriptionTactical True Apparent Wind Display RepeaterThe Clipper True Wind Display shows apparent wind speed and direction, when connected to a l...

DescriptionThe Target HF3 is a masterpiece of R. F. engineering covering the entire spectrum between 30Khz to 30Mhz. For those new to single side b...

DescriptionThrough hull transducer mounting kitKit for mounting depth transducer through wooden or steel hulls.This product may not be returned to ...

DescriptionWind Anemometer Cup Kit for Version 2 - 3 Wire UnitsSpare anemometer cup assembly with fixings and illustrated fitting instructions. Cli...

DescriptionSpare wind anemometer cup kit. Spare anemometer cup assembly with fixings and illustrated fitting instructions for Clipper, Target and C...

DescriptionWind Repeater DisplayAdd or replace the display on the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit. The C...

DescriptionThe Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally l...

DescriptionWind Vane KitSpare wind vane assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units w...

DescriptionWind Vane Kit Wireless Tactical for Version 2 - 3 Wire UnitsSpare wind vane assembly with fixings and illustrated fitting instructionsFo...

DescriptionWireless Masthead & Data BoxThe mast head transmitter is completely wireless and is supplied with a base unit, which is powered by t...